973 Corrodex Zinc Rich Cold Galv

Click here to view technical data sheet

A zinc rich cold galvanising product for use on bright iron and steel surfaces. Ensure the metal surface has been wire brushed to a bright metal surface before application. Recommended for aggressive environments, when the iron or steel is first treated with Corrodex Zinc Rich Cold Galv, then primed with Corrodex Etch Primer and overcoated with Corrodex Gloss Enamel Top Coat.

• Galvanic protection of Iron and Steel.
• Does not need overcoating.
• Suitable for repair of damaged galvanised surfaces.
• Made in NZ for NZ conditions.

Coverage 12-16 m²/L depending on surface texture, porosity and method of application.

Apply – Brush, Roller or Spray.

Recoat in 12 hours. For best results allow overnight dry. If left for periods longer than 24hrs before over coating, lightly sand the previous surface to ensure good contact is made with the new film.