Your ultimate defence against corrosion. Follow our expert guidelines to ensure long-lasting protection for every surface.

G.R.P. Fibreglass, Glassed Timber & Plywood

Surface Preparation Guide
Remove mould and release agents using Transomarine Thinner.
  1. Wash with warm water and detergent.
  2. Abrade entire surface, preferably with an orbital sander.
  3. Ensure surface is dry before continuing.

Below Waterline - One Pack

2 coats 208 Multi Prime
2 coats of selected Antifouling

02.08 Multi Prime

$82.23$271.30

Below Waterline - Two Pack

2 coats 199 Epoxy Primer Undercoat or 158 Hi Build Epoxy Primer
2 coats of selected Antifouling

Topsides - One Pack

2 coats 320 Primer Undercoat
2 coats 331 Gloss Enamel

Topsides - Two Pack

2 coats 199 Epoxy Primer Undercoat or 158 Hi Build Epoxy Primer
1-2 coats 343 Polyurethane Gloss

Deck and Cockpit - One Pack

2 coats 320 Primer Undercoat
2 coats 331 Gloss Enamel

Deck and Cockpit - Two Pack

2 coats 199 Epoxy Primer Undercoat or 158 Hi Build Epoxy Primer
2 coats 343 Polyurethane Gloss

Cabin - One Pack

2 coats 320 Primer Undercoat
2 coats 331 Gloss Enamel

Cabin - Two Pack

2 coats 199 Epoxy Primer Undercoat or 158 Hi Build Epoxy Primer
2 coats 343 Polyurethane Gloss

Cabin Interior - One Pack

2 coats 320 Primer Undercoat
2 coats 331 Gloss Enamel

Cabin Interior - Two Pack

2 coats 199 Epoxy Primer Undercoat or 158 Hi Build Epoxy Primer
2 coats 343 Polyurethane Gloss

Interior Varnish

3-4 coats 381 Ultra Varnish