Your ultimate defence against corrosion. Follow our expert guidelines to ensure long-lasting protection for every surface.

Timber

Surface Preparation Guide

New timbers require adequate sanding to provide an acceptable surface, and a good key for primer coats. Oily timber such as teak requires thorough sanding and degreasing with Transomarine approved solvents before application of the paint system. Adequate time should be allowed in the haul out period as retained moisture in the timber will hinder optimal adhesion.

Below Waterline - Single Pack

2 coats 208 Multi Prime
2 coats of selected Antifouling

02.08 Multi Prime

$82.23 – $271.30

Below Waterline - Two Pack

2 coats 199 Epoxy Primer Undercoat or 2 coats 158 Hi Build Epoxy Primer
2 coats of selected Antifouling

01.58 Hi Build Epoxy Primer Undercoat

$93.90 – $265.62

01.99 Epoxy Primer Undercoat 3:1

$76.92 – $257.34

Topsides - Single Pack

2 coats 320 Primer Undercoat
1-2 coats 331 Gloss Enamel

03.20 Primer Undercoat

$30.81 – $271.30

03.31 Gloss Enamel

$36.98 – $876.63

Topsides - Two Pack

2 coats 199 Epoxy Primer Undercoat
1-2 coats 343 Polyurethane Gloss

01.99 Epoxy Primer Undercoat 3:1

$76.92 – $257.34

03.43 Polyurethane Gloss

$55.59 – $454.66

Deck and Cockpit - Single Pack

2 coats 320 Primer Undercoat
2 coats 331 Gloss Enamel

03.20 Primer Undercoat

$30.81 – $271.30

03.31 Gloss Enamel

$36.98 – $876.63

Deck and Cockpit - Two Pack

2 coats 199 Epoxy Primer Undercoat
1-2 coats 343 Polyurethane Gloss

01.99 Epoxy Primer Undercoat 3:1

$76.92 – $257.34

03.43 Polyurethane Gloss

$55.59 – $454.66

Cabin - Single Pack

2 coats 320 Primer Undercoat
2 coats 331 Gloss Enamel

03.20 Primer Undercoat

$30.81 – $271.30

03.31 Gloss Enamel

$36.98 – $876.63

Cabin - Two Pack

2 coats 199 Epoxy Primer Undercoat
2 coats 343 Polyurethane Gloss

01.99 Epoxy Primer Undercoat 3:1

$76.92 – $257.34

03.43 Polyurethane Gloss

$55.59 – $454.66

Cabin Interior - Varnish Work

3-4 coats 381 Ultra Varnish

03.81 Ultra Varnish

$24.67 – $261.03

Cabin Interior - Exterior Varnish

3-5 coats 381 Ultra Varnish or 3-5 coats of 938 Alpha Varnish

03.81 Ultra Varnish

$24.67 – $261.03

09.382 Alpha Varnish

$50.11 – $483.62

Note: Transomarine Alpha Varnish is a moisture cured polyurethane, and is a hard wearing elastic finish.

Note: 158 Hi Build Epoxy Primer Use to fill and build a sound base on areas that are rough and require filling. Sand well between coats to obtain a smooth defect free surface.

Note: 905 Timber Preservative & Sealer Description: Timber Preservative & Sealer is a 2 pack Epoxy Clear designed to harden and densify timber and seal out moisture. Uses: Can be used on boat construction on all timber surfaces and also in repair and maintenance work. Application: Timber Preservative & Sealer should be applied using multiple coats. The first coat thinned to 50% with 903 Brushing Thinner and the second and third coats thinned to 20 and 10% respectively. Where multiple coats are being applied allow only enough time for the prior coat to become tacky before next application. Timber Preservative & Sealer may be overcoated with single pack and two pack systems ensuring the last coat of sealer has been allowed to cure fully, sanded and thoroughly solvent wiped. Alternatively 938 Alpha Varnish or 381 Ultra Varnish may be applied to the same prepared surface. Please refer to product label for full specifications.