875-400 2K Etch Primer 1:1

Click here to view technical data sheet

Modified vinyl acid etch primer. 2K Etch Primer is a high performance two component primer. It contains rust inhibiting pigments and phosphoric acid for etching of ferrous and non-ferrous metals. Suitable substrates for 2K Etch Primer include degreased iron, aluminium, bronze, copper, galvanised iron, steel and stainless steel. It is a fast air dry, anti-corrosive primer which exhibits good fresh water immersion properties, minimum ‘burn back” characteristics from welds, and is widely used as an adhesion promoting primer for plates or structural steel. 2K Etch Primer is therefore ideal for preparation in trailers, boats, tractors, cars and metal construction components.

• Yellow low sheen gloss finish.
• High performing two pack primer.
• Ideal for preparation of trailers, boats, tractors, cards and metal construction components.
• Made in NZ for NZ conditions.

Coverage approx. 10 m²/L depending on surface texture, porosity and method of application.

Apply by brush, roller, conventional or airless spray and dipping.

Recoat in 20-60 minutes to obtain maximum intercoat adhesion.

YELLOW CONTAINS INGREDIENTS WHICH MEAN THEY ARE RESTRICTED TO WORKPLACES ONLY AND CAN ONLY BE PURCHASED AFTER THE COMPLETION OF OUR SUPPLY OF HAZARDOUS SUBSTANCE FORM. PLEASE CONTACT OUR OFFICE FOR MORE INFORMATION. 0800 PAINT IT