A934 Modocote Two Pack Water Borne Epoxy Coating 1:1

Click here to view technical data sheet

A934 Modocote is a two pack water borne epoxy coating designed for use on concrete, concrete block, fibrous cement and cement plaster walls and floors.

  • MAF approved, and zero VOC emissions.
  • Stops rising damp and hydrostatic pressure.
  • Penetrates and locks onto concrete.
  • Water based product.
  • Made in NZ for NZ conditions.

Coverage approx. 8m²/L depending on surface texture, porosity and method of application.

Apply with brush or roller.

Overcoating Allow overnight drying between coats or a minimum of 4 – 6 hours at 20°C. Can be overcoated with 2K urethane or epoxy finishes providing the coating has been allowed to cure for a minimum of 8 – 12 hours. When overcoating aged material lightly sand surface and thoroughly degrease.