G.R.P. Fibreglass, Glassed Timber & Plywood
Remove mould and release agents using Transomarine Thinner.
- Wash with warm water and detergent.
- Abrade entire surface, preferably with an orbital sander.
- Ensure surface is dry before continuing.
Below Waterline
One Pack
- 2 coats 208 Multi Prime
- 2 coats of selected Transomarine Antifouling
Two Pack
- 2 coats 199 Epoxy Primer Undercoat or 158 Hi Build Epoxy Primer
- 2 coats of selected Transomarine Antifouling
Topsides
One Pack
- 2 coats 320 Primer Undercoat
- 2 coats 331 Gloss Enamel
Two Pack
- 2 coats 199 Epoxy Primer Undercoat or 158 Hi Build Epoxy Primer
- 1-2 coats 343 Polyurethane Gloss
Deck and Cockpit
One Pack
- 2 coats 320 Primer Undercoat
- 2 coats 331 Gloss Enamel
Two Pack
- 2 coats 199 Epoxy Primer Undercoat or 158 Hi Build Epoxy Primer
- 2 coats 343 Polyurethane Gloss
Cabin
One Pack
- 2 coats 320 Primer Undercoat
- 2 coats 331 Gloss Enamel
Two Pack
- 2 coats 199 Epoxy Primer Undercoat or 158 Hi Build Epoxy Primer
- 2 coats 343 Polyurethane Gloss
Cabin Interior
One Pack
- 2 coats 320 Primer Undercoat
- 2 coats 331 Gloss Enamel
Two Pack
- 2 coats 199 Epoxy Primer Undercoat or 158 Hi Build Epoxy Primer
- 2 coats 343 Polyurethane Gloss
Interior Varnish
- 3-4 coats 381 Ultra Varnish
Note: for a coloured, satin, mould resistant interior finish use Protective Paints 757 Bar Mould.